Skip to main content

YARA SUPPLIES OWN-MAKE SCRUBBER OVERBOARD PIPES

Friday, September 18, 2020 

Yara Marine Technologies has successfully delivered overboard pipes to a customer for the first time; the company says that design and material choice is crucial for successful operation as the environment inside the scrubber is highly corrosive, which has led it to develop its own pipes.

The overboard pipes, releasing the wash water to the sea, are usually manufactured and delivered by shipyards. Several ship owners have experienced the spool pieces to be below the required standard and not able to handle the acidic environment. As the industry has experienced corrosion issues as a consequence, Yara Marine has started receiving requests from clients to deliver these pipes in order to ensure quality all the way from the scrubber to the hull.

In collaboration with one of its tower suppliers and a customer, Yara Marine has designed, developed and delivered overboard pipes together with process-, drain- and exhaust pipes. The former includes diffusers and was welded to the hull of the vessel by the shipyard.

Technical Project Manager Martin Gustafsson said: “An important part of this project has been to collaborate with all stakeholders throughout the process to collect as much information as possible for the best execution from design to installation. From this, we can see that we are well positioned for future deliveries as we expect to deliver more overboard pipes in the future.”

Yara Marine's scrubbers are made in high grade nickel alloys selected to withstand scrubbing and high temperatures when dry running. Due to high temperatures when dry running, pipes need to be fitted between the scrubber tower and the vessel pipe system. During scrubbing, the wash water is transported via the vessel’s pipe system, normally made in Glass Reinforced Epoxy that works well in corrosive environments. Yara Marine recommend the pipe spools to be in an equivalent high-quality material to the scrubber tower such as high-grade stainless steel in order to withstand the corrosiveness.

The design of the overboard pipes has been developed to meet the set requirements with a combination of 254SMO and CS material. 254SMO is selected for its good corrosion resistance and to ease the installation at the shipyard. A CS transition section is welded between the hull and the overboard pipe to further secure a smooth transition between the coated hull and pipe, with a 625 Inconel weld overlay over the CS. The transition between the coated CS hull and the SMO254 pipe is highly corrosive due to turbulent flow of acidic wash water. To secure full corrosion resistance in the challenging transition between carbon steel and SM0254, the pipe and carbon steel piece was delivered with a multiple layered weld overlay of 625 Inconel.

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index

Web Analytics