Skip to main content

THORDON SUCCESS SPURS FLEET-WIDE RIVERTOUGH CONVERSION

Tuesday, May 5, 2020 

Harken Towing, a western Canada-based workboat company with operations along the Fraser River, is converting its vesselsí tailshaft bearings to RiverTough following the success of the Thordon bearing system aboard the 14.54m twin-screw tug 'Granny Hutch'.

Since the first installation in 2015, Harken Towing, which operates a fleet of 10 shift tugs, five continuous tugs and nine aluminium water taxis, has installed RiverTough to an additional three tugs and plans to convert the remaining vessels at subsequent drydockings.

Sandy Bourquin, Marine Account Executive, Palmer Johnson Power Systems, Thordon Bearings’ distributor in British Columbia, said the installation has significantly reduced the company’s operational expenditure: “Many tug owners operating in highly abrasive, silty waterways, such as the Fraser River, find that traditional rubber bearings need to be replaced every two years. This means that vessels have to be routinely taken out of service and have their shafts withdrawn, which is a very costly exercise. RiverTough bearings are saving operators a lot of unnecessary expenditure as it is lasting over two times the life of rubber bearings.”

The 152.4mm polymer bearings installed to Granny Hutch five years ago have not been replaced and remain in almost perfect condition. Harken Towing engineer Shawn Davies said: “We checked wear and clearances during a recent drydocking and found the bearings to be in excellent condition. RiverTough has proven itself. The whole system and all the components are in perfect working condition.”

Since that first installation, Harken Towing has converted from rubber bearings to RiverTough tailshaft bearings on Ken Mackenzie and Harken 6.

Scott Groves, Thordon Bearings’ Regional Manager – Americas, said: “While there are five companies operating Thordon’s RiverTough along the Fraser River, this is the first clearance data we have received for a vessel operating on this waterway. The feedback from Harken Towing provides clear evidence of RiverTough’s superior wear life in very abrasive water conditions. They routinely outlast rubber bearings by factor of two or more.”

Data from workboats operating the Mississippi River system show typical RiverTough wear rates of 0.075mm to 0.100mm in 6000 to 7000 hours of annual use.

Founded in 1948, Harken Towing is one of the most prominent marine towing services companies on Canada’s West Coast. The company’s main focus is towing log booms and barges in the rivers and Coast of the Pacific North West. The operator plans to install RiverTough to its remaining vessels over the course of the next few years.

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index

Web Analytics