Skip to main content

PROPELLER REFIT SAVES ON FUEL AND CO2 AHEAD OF EEXI AND CII

PROPELLER REFIT SAVES ON FUEL AND CO2 AHEAD OF EEXI AND CII

Thursday, September 30, 2021 

Ship operator and manager Vroon recently approached Berg Propulsion to investigate the possibility of optimising the propulsion system on its container vessel 'Indian Express', fitted with a controllable pitch propeller, in order to secure the sustainability benefits available through greater ship efficiency, as part of Vroons continuing strategy to find the best practical answers to lowering CO2 emissions, ahead of the IMOs Energy Efficiency Ship Index (EEXI) and Carbon Intensity Indicator (CII).

David Sakandelidze, Berg Propulsion Business Manager, Energy and Efficiency, said: “In close cooperation with the ship owner and ship operator, we analysed the vessel’s current and future operation needs and defined its operation profile. Next, the performance of the original propeller blades was benchmarked against the vessel’s defined operation profile.”

From here, Berg Propulsion’s advanced simulation tools were used to develop a new propeller geometry, which modelling showed would achieve remarkably superior performance the new operation profile anticipated for the ship. In line with these findings, Berg Propulsion designed blades tailored for the operation, improving efficiency significantly.

Sakandelidze said: “Efficiency gains are made for much of the time and, at 12 knots, the new blades achieve up to 50% higher efficiency than the ones they replace.” 

With performance improved at the speeds most commonly required during operations, Indian Express could achieve as much as 22% fuel saving overall, as well as lower emissions that should go farther than the requirements of the IMO’s carbon Intensity Initiative goals for 2026.

“We have recently put a new focus on CII and EEXI and supporting customers to improve and optimise vessels already in operation,” said Jonas Nyberg, MD West, Berg Propulsion. “We are excited to partner our customers, and to help them become more efficient while reducing their environmental footprint.”

Berg’s focus targets hydrodynamic upgrades such as blade optimization, control system upgrades such as installing an engine pitch and rpm optimisation system, Dynamic Drives, and electrical upgrades to run shaft alternators with variable frequency coupled with energy storage.

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index