Skip to main content

INDUSTRY SURVEY HIGHLIGHTS LOW-SULPHUR FUEL PROBLEMS

Wednesday, August 19, 2020 

BIMCO, International Chamber of Shipping (ICS), Intercargo and Intertanko have jointly published the results of an industry survey aimed at getting an overview of how the industry has experienced the transition to using compliant low-sulphur fuel oil.

The maritime industry’s transition to the IMO sulphur limitation which came into force on 1 January 2020 has not been without problems. Since fuel oil properties are fluctuating, it is expected that quality and safety problems will continue to be a challenge for the global shipping industry.

The survey was launched on 24 February 2020 and ended on 6 May 2020, and the main focus of the survey is on problematic properties of the IMO 2020 compliant fuel oil that can lead to issues.

Christian Bækmark Schiolborg, BIMCO Manager, Marine Environment, said: “The survey gives us valuable insight into the magnitude and nature of problems encountered by the industry in the transition to using low-sulphur fuel oil. The industry had widespread experience with how to manage heavy fuel oil, and the survey provides insight into which parameters of the new fuel types are posing the biggest challenges for onboard fuel management.”

The survey focuses on potential problems such as increased sludge discharge, clogging of fuel pipes, preheaters, fuel separators and fuel filters, fuel pumps getting stuck, problems with fuel injection and poor ignition of fuel oil. It also focuses on issues regarding incomplete combustion, wax appearance and increased wear and tear of cylinder liners. These are problems that may lead to loss of propulsion and/or black out.

The survey indicates global challenges with fuel characteristics and limits being off specifications most frequently when it comes to total sediment, aluminium plus silicon, pour point, ash, flash point, acid number and viscosity. It indicates that most common operational problems experienced are increased sludge deposits and wax appearance after switching to the compliant fuel oils with a sulphur content not exceeding 0.50%.

Lastly, the survey indicates that when commercial fuel oil samples are tested after bunkering, sulphur content is among the most frequent parameters to be indicated as off specifications and consequently, an indication of potential non-compliance with MARPOL annex VI.

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index

Web Analytics