Skip to main content

ABB ELECTRICS FOR SOUTH ASIA’S FIRST LNG HYBRID TUG

Wednesday, April 15, 2020 

ABB’s electric propulsion, power, energy storage, control and automation technology will be employed on the first tug in South Asia capable of switching between low emission liquefied natural gas (LNG) engines and zero-emission battery power.

The tug, which will operate in Singapore harbour, has been ordered by Sembcorp Marine subsidiary Jurong Marine Services for delivery from the Sembcorp Marine shipyard by the end of 2020.

The Maritime Port Authority of Singapore (MPA) is incentivising the use of LNG to support the IMO's aims to halve ship CO2 emissions by 2050.

The project represents the first delivery of ABB’s Onboard DC Gridpower and distribution system for a tug application. Leveraging Onboard DC Grid, the vessel will be able to deploy 904kWh of battery power for zero-emission operation, as well as for peak shaving – improving utilisation of electricity use on board.

“This is a breakthrough in the tug market for the ABB’s energy storage technologies and a strong validation of Onboard DC Grid as the ultimate solution for power management efficiency for hybrid propulsion,” said Juha Koskela, MD ABB Marine & Ports. “Future-proofing for a different energy mix makes particular sense for tugs and other port service vessels, as the most likely candidates to face imminent environmental restriction. This is also a great example of a local team meeting a regional priority by realising ABB’s ‘Electric. Digital. Connected.’ vision.”

According to ABB, gas fueled engines face a particular challenge when it comes to handling the fast-changing load capabilities demanded by tugs. Leveraging the Onboard DC Grid system, the tug’s engines will be able to run at variable speeds for optimised LNG fuel economy at each load level.

Additionally, through integration with an energy storage source, the batteries will be able to provide power to the tug’s propulsion system almost instantaneously. Leveraging the capabilities of Onboard DC Grid, the LNG engines will not have the need to be tied to a fixed speed against dynamic loads, and would be able to provide energy at variable rpm, further enhancing efficiency, responsiveness and sustainability of tug operations. ABB’s scope of supply includes the DC drives for the PTI/PTO variable speed shaft generator, which integrates with the energy storage battery.

Reader Comments (0)

There are currently no comments on this article. Why not be the first and leave your thoughts below.

Leave Your Comment

Please keep your comment on topic, any inappropriate comments may be removed.

Return to index

Web Analytics